Your hot water runs brown or orange, but the cold water runs clear. That is rust from inside your water heater. The tank is corroding, and the anode rod that was supposed to stop it is gone.
Nampa HeatPros fixes rusty water in Nampa, Idaho. We find where the rust comes from, tell you straight whether the tank can be saved, and give you a written quote before any work starts.
Why Your Water Heater Makes Rusty Water
Rusty water has three causes. The hot versus cold test tells you which one it is.
A tank heater lasts 8 to 12 years, according to the U.S. Department of Energy. Rusty water from a heater past 10 years old is a late warning. The tank is already corroding, and a leak is often not far behind.
What to Check Before You Call
You can check three things before you call us. They tell us where the rust comes from.
Do not drink rusty water, and do not run it through a water softener or filter and call the problem fixed. A filter catches rust flakes. It does not stop the tank from corroding.
How We Fix Rusty Water in Nampa
Here is what we do, step by step.
- We find the source. We run the hot tap and the cold tap, check the anode rod, and look at the tank. The rod and the age tell us whether the tank can be saved.
- We give you an upfront price. We tell you the price before any work starts, with parts and labor split out. You approve it, then we fix it.
- We fit a new anode rod and flush the tank. If the tank is still sound, a new anode rod and a flush fix the rust. The new rod protects the tank from here on. A flush clears the rust flakes and sediment that have built up.
- We replace the tank if it is rusted through. If the tank itself is corroding, no rod and no flush will save it. We replace the unit. A tank swap takes 3 to 5 hours, and we haul the old unit away.
- We test the water again. We run the hot tap and check that the water runs clear. If the pipes are the problem, we tell you that too.
What It Costs to Fix Rusty Water in Nampa
Here are the national figures, from Fixr and HomeGuide, labelled national because they are not Nampa prices.
An anode rod replacement runs $125 to $350 nationally, according to Fixr and HomeGuide. A tank flush runs $75 to $250 nationally, according to HomeGuide. Most rusty water jobs that can be fixed land in the $125 to $350 range.
If the tank is rusted through, replacement is the only option. A new tank heater installed runs $600 to $3,100 nationally, according to HomeGuide, January 2026. Fixr puts the average replacement near $1,400.
A service call or trip fee runs $50 to $200 nationally, and labor runs $75 to $150 an hour. We split parts, labor, and the trip fee out in our quote, so you see exactly what you pay for.
Use the 50 percent rule. If the repair quote is more than half the price of a new unit, and the heater is past half its expected life, put the money toward the new one. A 5 year old tank with a $200 anode rod is worth fixing. An 11 year old tank with rusty water is not.
Why Nampa Homeowners Call Nampa HeatPros for Rusty Water
Rusty Water Across Nampa
We drive to homes all over Nampa, and to Meridian, Caldwell, Kuna, Middleton, Star, and Boise. In Nampa, that means downtown and the historic streets near the Nampa Depot, North Nampa, South Nampa around Lake Lowell, East Nampa along Ustick Road, the NNU area, West Nampa near Garrity Boulevard, and the Karcher and Greenhurst area.
Rusty Water from Water Heater in Nampa: FAQs
Why is my hot water rusty but my cold water is clear?
The rust comes from inside the water heater tank. The anode rod that protects the tank is gone, and the steel tank is corroding. Rust flakes off into the hot water. The cold water runs clear because it never passes through the tank.
Why is both my hot and cold water rusty?
Both taps rusty means the problem is the pipes, not the heater. Old galvanized pipes rust from the inside, and the rust shows up at every tap. The heater may be fine. We check the pipes and quote that work separately.
Can rusty water be fixed, or do I need a new water heater?
It depends on the tank. If the tank is still sound, a new anode rod and a flush fix it. If the tank itself is corroding, no rod and no flush will save it, and the tank has to be replaced. We check the rod and the age before we quote, so you know which one it is.
How much does it cost to fix rusty water?
Nationally, an anode rod replacement runs $125 to $350, and a tank flush runs $75 to $250, according to Fixr and HomeGuide. If the tank has to be replaced, a new tank heater installed runs $600 to $3,100 nationally. These are national figures. We give you a written quote for your home before any work starts.
Book Your Rusty Water Fix in Nampa Today
Rusty water means your tank is asking for help. Call Nampa HeatPros. We will find where the rust comes from, tell you straight whether the tank can be saved, and fix it the same day in most cases. That is how rusty water from water heater Nampa ID should be fixed.
Our Service Area
We serve Nampa and the towns around it. Pick your area to see water heater repair there.

