Idaho law is plain: no one does plumbing work for pay in this state without a state certificate of competency. This page explains the Idaho plumbing licence rules that apply in Nampa: the three levels, what each one takes to earn, and what it means for you when a plumber comes to your home.
The Three Levels
Idaho issues plumbing certificates in three main classes, set out in Idaho Code 54-2611 and the rules in IDAPA 24.39.20: apprentice, journeyman, and contractor. There are also specialty certificates for narrow work, covered below.
An apprentice is a worker in training. An apprentice registers with the State and works under a licensed journeyman. An apprentice cannot work alone and cannot take plumbing jobs on their own.
A journeyman is a plumber who has finished the training, passed the Board exam, and holds a certificate of competency. A journeyman can do plumbing work, but a journeyman cannot run a plumbing business. Only a contractor certificate lets a person or a company take plumbing jobs, sign contracts, and advertise as a plumbing contractor.
A contractor is a journeyman who has gone one step further: a contractor exam plus a compliance bond. The company you hire should hold a contractor certificate. The plumber who comes to your door should hold at least a journeyman certificate and work for a licensed contractor.
How a Plumber Becomes a Journeyman
The journeyman route is set out in IDAPA 24.39.20, Rule 100.02, and it takes years. An applicant must pass an exam designated by the Idaho Plumbing Board, and meet one of two experience routes.
Route one: at least 8,000 hours of work experience as a registered apprentice making plumbing installations, plus satisfactory completion of 576 hours of a board approved course of instruction. That is roughly four years of full time work and four years of classes, about 144 class hours a year.
Route two: proof of 16,000 hours of plumbing experience, with no class hours required. That is roughly eight years of full time work.
Two details matter. First, pipe fitting work and appliance plumbing specialty work do not count toward the journeyman experience hours. The hours must be plumbing installation work. Second, an applicant may sit for the exam after showing proof of either the 576 hours of instruction or the 16,000 hours of experience. The exam itself is the IAPMO journeyman exam, booked through PSI, under the Board.
How a Plumber Becomes a Contractor
A contractor certificate sits on top of the journeyman certificate. Under IDAPA 24.39.20, Rule 100.03, an applicant must already hold a journeyman certificate of competency, pass an exam designated by the Board, and provide a compliance bond of 2,000 dollars.
The bond must stay in force for the full certificate period, and proof of bond renewal is required to renew or revive a certificate. A contractor certificate is tied to one person or one company. A contractor can only represent one person or entity as stated on the application. If that representation changes or ends, the contractor must tell the Division in writing at once. Failing to do so counts as improper transfer of a licence.
Certificates run for three years under Idaho Code 54-2617. The DOPL fee table lists a contractor certificate at 147 dollars, with renewal at 108 dollars, and a journeyman certificate at 29 dollars and 40 cents, with renewal at 21 dollars and 60 cents, plus a 22 dollar and 50 cent application fee. Fees can change, so check the current DOPL fee table before you rely on them.
Specialty Certificates
Idaho also issues specialty certificates for narrow work, under IDAPA 24.39.20, Rule 100.04. Two matter for water heaters.
The appliance specialty journeyman needs an exam plus either 3,000 hours of apprentice specialty experience and 72 hours of board approved specialty training, or 6,000 hours of specialty work experience. The appliance specialty scope covers, in one family and two family homes only, disconnecting, capping, removing and reinstalling within 60 inches of the original location: a water heating appliance, water treating or filtering devices, a temperature and pressure relief valve, a condensate drain, and an indirect drain.
That scope has hard limits. It does not include installing, testing, or certifying backflow prevention devices. It does not include any change to the drain, waste, or vent systems. A specialty certificate is not a full journeyman certificate, and it does not let a person do general plumbing work.
The water pump specialty journeyman needs an exam plus 3,000 hours of specialty experience. Its scope is water service piping from a pump to a storage expansion pressure tank, in one and two family homes only.
What the Law Says About Working Without a Certificate
Idaho Code 54-2610 makes it unlawful to engage in the business, trade, or work of plumbing without passing an exam and holding a state certificate of competency. The penalty rules in IDAPA 24.39.20, Rule 300, put a civil penalty of up to 1,000 dollars on each separate count or offence for working plumbing without an active certificate.
The same rule covers advertising. It is a violation to advertise as a plumbing contractor without holding a current and valid plumbing contractor certificate issued by the Division. It is also a violation to advertise without including the contractor certificate of competency number in the advertisement. That rule covers newspaper, phone directory, flyer, phone, television, radio, internet, and door to door ads. In plain terms: a real Idaho plumbing contractor puts their certificate number in their ads. If an ad for plumbing work in Nampa shows no certificate number, ask for it before you book.
Knowing employment of a person who does not hold an active certificate is also a violation, and so is working as an apprentice without the required journeyman supervision. The law puts the duty on both sides: the worker must hold the certificate, and the company must employ only people who hold one.
What This Means for You
When a plumber comes to your home in Nampa, three checks take two minutes and save you trouble.
First, ask for the contractor certificate number and the exact business name that will appear on your paperwork. A real contractor gives both without hesitation. The number should match the name on the quote, the invoice, and the permit.
Second, look the number up on the State's own site. The Idaho Division of Occupational and Professional Licenses, DOPL, runs a free public licence lookup. Our page on how to check a Nampa plumber's licence walks through it step by step at /check-plumber-licence-nampa-id/. Check three things on the record: the certificate is active, not expired, suspended, or revoked; the class covers your job; and the name matches the business on your contract.
Third, match the certificate to the job. A water heater replacement needs a contractor certificate behind it, because the job usually needs a permit and an inspection. Our permit page at /water-heater-replacement-permit-nampa-id/ states the Nampa rule and what we could and could not verify about it. A simple repair still needs a journeyman or a properly supervised apprentice. A specialty certificate alone does not cover general plumbing work.
If a plumber cannot show a certificate number, or the lookup shows an expired or lapsed record, do not book the job. Get another quote from a contractor whose record checks out.
Questions About Idaho Plumbing Licences
Do I need a licensed plumber for a water heater repair in Nampa?
Yes, for paid plumbing work. Idaho law requires a state certificate of competency for plumbing work, and a water heater repair is plumbing work. A homeowner may do plumbing on their own home in some cases, but a hired worker must hold the right certificate.
What is the difference between a journeyman and a contractor?
A journeyman has finished the training and passed the exam, and can do plumbing work. A contractor is a journeyman who has also passed the contractor exam and posted a 2,000 dollar compliance bond. Only a contractor certificate lets a person or company take plumbing jobs and advertise as a plumbing contractor.
How long does an Idaho plumbing certificate last?
Certificates run for three years under Idaho Code 54-2617. The contractor must keep the 2,000 dollar bond in force for the full period, and show proof of bond renewal to renew the certificate.
Does a handyman need a plumbing licence in Idaho?
If the work is plumbing work done for pay, yes. Idaho does not have a general handyman licence that covers plumbing. The person doing the work must hold the plumbing certificate that fits the job, or work under a licensed journeyman as a registered apprentice.
Check the Idaho Plumbing Licence Before You Book
A licence number is the fastest way to tell a real plumber from a pretender. Ask for the number, check it on the DOPL lookup, and confirm the record is active and the name matches. Our guide at /check-plumber-licence-nampa-id/ shows each step. And if your water heater needs repair or replacement, read our page on water heater replacement in Nampa at /water-heater-replacement-nampa-id/ to see what the job involves and what it costs.
Our Service Area
We serve Nampa and the towns around it. Pick your area to see water heater repair there.

